Using The Fousb; Using The Fousb (Flash-Over-Usb); Before Starting The Fousb - Renesas M16C FAMILY User Manual

4.1 Using the FoUSB (Flash-over-USB)

4.1.1 Before Starting the FoUSB

1) Check to see that the FoUSB is installed in your host computer (PC).
2) Check to see that PC, USB Cable, USB Monitor Board, Flat Cable and Target Board
are firmly connected. (See Figure 4-1)
1. USB Cable
2. Target Board

4. Using the FoUSB

Figure 4-1 connect-1
3. USB Monitor Board
27
4 Using the FoUSB
4. Flat Cable
5. Target MCU