Software Break Method; Reset Execution; Kd Completion - Renesas M16C FAMILY User Manual

5.1.7 Software Break Method

When executing the software break, the software break can be set as the place which
has "-" in "BRK" in Program Window screen. The KD Main screen is as Figure 5-10.

5.1.8 Reset Execution

User Program is in the same status as immediately after download. Click the "Reset"
button (Figure 5-6, D) on the KD Main screen.

5.1.9 KD Completion

1) Before completing a KD, stop the User Program.
2) Next, select "File -- Exit" menu in the KD Main screen. When the Exit menu is
selected opens, click "OK" button. If "Cancel" is clicked, the KD is not completed.
Software break point
Figure 5-10 Software Break
57
5 Using the KD