Using The Kd; Before Starting The Kd - Renesas M16C FAMILY User Manual

5.1 Using the KD

5.1.1 Before Starting the KD

1) Corresponding MCU become only R8C/Tiny, M16C/10, M16C/20, M16C/Tiny,
M16C/60 series, M16C/80 and M32C/80 series.
2) Check to see that the KD is installed in your host computer (PC).
3) Check to see that PC, USB Cable, USB Monitor Board, Flat Cable and Target Board
are firmly connected. (See Figure 5-1)
USB Cable
Target Board
5. Using the KD
Figure 5-1 connect-2
49
5 Using the KD
USB Monitor Board
Flat Cable