Renesas M16C FAMILY User Manual page 19

10) The following figure is displayed when installation of USB Driver is completed. Click the <OK>
button.
11) When the install component
with a firmware older than the firmware of FoUSB. The following figure will be displayed if KD30
is detected.
If you want to update a firmware, click the <Yes> button. When <No> button is clicked, the
firmware of KD30 is not updated.
Note: When the install component "Update KD3083 Files" is chosen, the update check screen is
displayed like the above.
"Update KD30 Files" is chosen, FoUSB installer seaches KD30
16
3 Installing