General Product Information
PNA Series Microwave Network Analyzers
Analyzer Options, Upgrades, and Accessories
E8362B, E8363B, E8364B
isolators can be added to complete the test setup. Test port output power up to 1 Watt
(+30 dBm) can be applied to the device under test (DUT). Additionally, there is an external
reference input that allows the external amplifier's frequency response and drift to be
ratioed out. There are also internal step attenuators between the coupler and the receivers
to prevent receiver overload.
For high dynamic range measurements, front panel jumpers are moved to reverse the
signal path through one of the couplers, allowing for a 15 dB improvement in transmitted
signal sensitivity in one direction only. Jumpers are installed on both ports allowing the
user to choose a measurement in either the forward or reverse direction.
Option 016, Receiver Attenuators
This upgrade provides a 35-dB step attenuator, in 5-dB steps, in the A and B receiver
channels.
Option 022, Extended Memory
This upgrade provides additional RAM for a total of 512 MB.
Options 040 and 041, Extended Frequency Range to 40 GHz
This upgrade—E8362BU-040—provides the additional hardware and software necessary
to make frequency measurements up to 40 GHz with your E8362B PNA.
If you have a standard E8362B PNA, then upgrade E8362BU-040 provides the additional
hardware and software necessary to make frequency measurements up to 40 GHz.
If your E8362B PNA already has option 014, then option E8362BU-041 provides additional
hardware and software necessary to make frequency measurements up to 40 GHz, and
upgrades your 3.5 mm connectors to 2.4 mm connectors.
Options 050 and 051, Extended Frequency Range to 50 GHz
This upgrade provides the additional hardware and software necessary to make frequency
measurements up to 50 GHz with your E8362B/63B PNA.
If you have a standard E8362B PNA, then upgrade E8362BU-050 provides the additional
hardware and software necessary to make frequency measurements up to 50 GHz.
If your E8362B PNA already has option 014, then option E8362BU-051 provides additional
hardware and software necessary to make frequency measurements up to 50 GHz, and
upgrades your 3.5 mm connectors to 2.4 mm connectors.
If you have a E8363B PNA—with or without option 014—then upgrade E8363BU-050
provides the additional hardware and software necessary to make frequency
measurements up to 50 GHz.
2-4
Service Guide E8364-90026