Maintenance; Physical Maintenance; Electrical Maintenance; Analyzer Options, Upgrades, And Accessories - Agilent Technologies E8362B Service Manual

PNA Series Microwave Network Analyzers
E8362B, E8363B, E8364B

Maintenance

WARNING To prevent electrical shock, disconnect the analyzer from the mains
source before cleaning. Use a dry cloth or one slightly dampened
with water to clean the external case parts. Do not attempt to clean
internally.

Physical Maintenance

Clean the cabinet, including the front panel, using a dry or slightly damp cloth only.

Electrical Maintenance

Refer to "Contacting Agilent" on page 2-10

Analyzer Options, Upgrades, and Accessories

How to Order an Upgrade

The options described in this section can be ordered as upgrades. To order an upgrade for
your microwave PNA, order the analyzer's model number, followed by a "U", then indicate
the option to be added:
• Your analyzer's current model number followed by a "U". For example, E8364AU.
• The desired option from the available list. For example, Time Domain.
Individual upgrade kits are also available and can be ordered by part number. Refer to
E8362B Upgrade Kits
of available kits.

Option 010, Time Domain

An Option 010 analyzer can display the time domain response of a network or test device
by calculating the inverse Fourier transform of the frequency domain response. This
calculation allows the Option 010 analyzer to show the response of a test device as a
function of time or distance. In time domain, the magnitude and location of a discontinuity
and the characteristics of individual transmission paths of a network or test device can be
determined. Time domain operation retains all the accuracy of active error correction.

Option 014, Configurable Test Set

An Option 014 analyzer can be configured to measure high-power devices and devices for
high dynamic range.
For a high-power measurement, external amplifiers and high power attenuators or
Service Guide E8364-90026
and to
and E8363B, E8364B Upgrade Kits
General Product Information
Chapter 3, "Tests and Adjustments."
on page 6-58
Maintenance
for a complete list
2- 3