Installing Or Changing A Serial Number - Agilent Technologies E8362B Service Manual

Option Enable Utility

Installing or Changing a Serial Number

Installing or Changing a Serial Number
It is necessary to reinstall the instrument serial number if the A16 test set motherboard is
replaced.
IMPORTANT Use extreme care when entering the serial number, as only one attempt is
allowed.
1. To change a serial number, select
Figure B-1). The current serial number is displayed. If no serial number has previously
been entered, the word "NONE" will be displayed.
2. Type the new serial number into the space provided, click
NOTE To change an incorrect serial number, a clear-code password is required.
Contact Agilent to obtain the clear-code. Refer to
page 2-10.
B-6
from the
Change Serial
PNA Series Microwave Network Analyzers
E8362B, E8363B, E8364B
menu bar (see
Option Enable
.
Serial
"Contacting Agilent" on
Service Guide E8364-90026