PNA Series Microwave Network Analyzers
Troubleshooting
E8362B, E8363B, E8364B
Rear Panel Troubleshooting
Troubleshooting Systems with Controllers
Passing the preceding test indicates that the analyzer's peripheral functions are operating
normally. Therefore, if the analyzer has not been operating properly with an external
controller, check the following:
• The GPIB interface hardware is incorrectly installed or not operational. (Refer to the
embedded help in your analyzer.)
• The programming syntax is incorrect. (Refer to the embedded help in your analyzer.)
Service Guide E8364-90026
4- 23