W&T 57630 Manual page 79

W&T
172.16.232.6;W&T Web-IO 12xDigital;input;0000
If GET Header enable was activated, the header precedes all data
transmission from the Web-IO.
If all conditions have been specified, activate the new setting
using Config >> Session Control >> LogOut.
Messaging with defined input patterns
In some applications it is practical to get the state of the inputs
only when certain input patterns occur.
i
The messaging method described here can be used in
tandem with normal event-triggered operation; in
practice however this does not offer any advantages, since in
this case there will be a message whenever there is a change.
This means you would receive double messaging whenever the
specified input pattern occurs.
To set the conditions for a TCP alarm message when certain
input patterns occur, go to the navigation tree and select
Config >> Device >> Alarm >> Alarm 1
m
Required access rights: Administrator
Subject to errors and modifications:
Controlling the Web-IO with TCP/UDP Sockets
79