W&T 57630 Manual page 66

W&T
Java Applets
In this case value can be set to off. This means there is a data
load for updating the inputs when an input changes.
For the changes to the input trigger to become effective, the
new settings must be saved under Control >> Logout.
outputpolling
This parameter is used to specify when starting the applet
whether the outputs should be checked for their state at the
interval set under pollingrate.
The value for outputpolling can be set to on or off.
counterpolling
This parameter is used to specify when starting the applet
whether the counters should be checked for their state at the
interval set under pollingrate.
The value for counterpolling can be set to on or off.
66