W&T 57630 Manual page 152

W&T
Alarm
m
Required access rights: Administrator
Send these settings to the Web-IO by clicking on the Temporary
Storage button.
Basic settings for sending by e-mail
m
Required access rights: Administrator
In order for the Web-IO to send e-mail in the first place, you must
make a few basic settings.
Go to Config >> Device >> MailAdmin:
Fill in the fields according to your application:
Name
Name entered as the sender when sending the e-mail.
Reply Address
E-mail address entered as the destination address in the
outgoing e-mail when the recipient of an alarm e-mail selects
152