W&T 57630 Manual page 161

W&T
IP-Adr
Here you enter the IP address of the Syslog server receiving the
Syslog message.
Port
In this field enter the local UDP port on which the Syslog server
should receive the Syslog message.
The standard port for Syslog is 514.
Syslog-Text
Just as with the mail and SNMP function, it is possible to enter a
text here for sending to the Syslog server. To include the status
of inputs and outputs or states of the counters you can also
use the alarm variables.
Alarm Variable Description
<i> Input state as bit pattern in hex format
<ix> State of input no. x
ON = 1,
OFF = 0,
x may be between 0 and 11
<o>
Output state as bit pattern in hex
format
<ox> State of output no. x
ON = 1,
OFF = 0,
x may be between 0 and 11
<cx> Count state of counter no. x in decimal
format
x can be between 0 and 11
<t>
Time stamp with date and time
formatted
DD.MMM.YYYY hh:mm:ss
<br>
Inserts a line skip
Subject to errors and modifications:
Alarm
161