W&T 57630 Manual page 181

W&T
Puls Start
ON
OFF
0 50 100
In the base state the output is not switched (0V). If the output
is now set to ON via browser or from an application, the Web-IO
switches the supply voltage +Vdd to the output for the set pul-
se duration.
negative:
Puls Start
ON
OFF
0 50 100
In the base state the output is switched to supply voltage +Vdd.
If the output is now set to ON from an application, the Web-IO
turns the output off (0V) for the set pusle duration.
1
With negative polarity negative logic is used. Switching
to ON causes the corresponding output to be turned off.
I
It is not possible to switch a negative pulse via HTTP
from the browser. If you need to work with negative
pulses from the browser, this can be done using the Java
applet.
Logout and Save activates the new setting.
Subject to errors and modifications:
Ports - Input- and output configuration
Puls Duration
150 200 250 300
Puls Duration
150 200 250 300
t
ms
t
ms
181