W&T 57630 Manual page 125

W&T
Box-to-Box
Now select in the navigation tree of the master : Config >>
Device >> Output Mode and set the outputs that you no longer
want to work under Box-to-Box to HTTP.
Confirm by clicking on the Temporary Storage button. Now you
must still activate the new settings. Use the Logout button or in the
Config menu select >> Session Control >> LogOut.
After clicking on the Save button all the settings are updated in
the Web-IO and the start page is reopened in Default User
mode.
Stopping Box-to-Box Modus for the Slave Web-IO
m
Required access rights: Administrator
Select in the navigation tree of the slave: Config >> Device >>
Basic Settings >> Binary1 >> TCP Server and set Application
Mode to Default.
Confirm by clicking on the Temporary Storage button.
Now select in the navigation tree Config >> Device >> Output
Mode and set the outputs that you no longer want to work under
Box-to-Box to HTTP.
Confirm by clicking on the Temporary Storage button. Now you
must still activate the new settings. Use the Logout button or In the
Config menu select >> Session Control >> LogOut.
Subject to errors and modifications: 125