W&T 57630 Manual page 141

W&T
If this is successful, you can then select the „Default Security"
tab and there check „Enable remote connection".
Note also that under Windows 95 it is not possible to start an
OLE server using a DCOM call from the outside. The OPC server
would have to be started manually on a Win95 computer before
OPC clients can connect to it from other computers.
i
Detailed information on the subject of DCOM can also be
found in the Microsoft Knowledge Base, in articles such
as:
176799,
INFO: Using DCOM Config (DCOMCNFG.EXE) on Windows NT
165101,
HOWTO: Use Win95 as a DCOM Server
182248,
HOWTO: Use DCOM Config (DCOMCNFG.EXE)
with Windows 95
158508,
FAQ: COM Security Frequently Asked Questions
174024,
FAQ: DCOM95 Frequently Asked Questions
One of many methods for locating these articles is the search
e n g i n e o n t h e M i c r o s o f t S u p p o r t p a g e , h t t p : / /
support.microsoft.com. There select „English Knowledge Base" as
the eategory and enter an article number like „165101" as the
search term.
Subject to errors and modifications:
OPC
141