W&T 57630 Manual page 179

W&T
The example above looks like this in the browser:
Input Mask
Select here all the inputs you want to be included in the logic
operation.
Input Inverter
Here you specify whether the state of the input should be
inverted..
= Input is evaluated as it is
= The inverse of the input state is evvaluated
Logic Func
Specifies whether an AND or OR operation is applied.
Output Inverter
Here you specify whether fulfillment of the logic conditions
sets the output to ON or OFF.
= Output is set to ON
= Output is set to OFF
Example
The configuration illustrated sets Output 0 to ON when Input 0
is ON and Input 1 is OFF.
Subject to errors and modifications:
Ports - Input- and output configuration
179