W&T
Local Port:
Unless your network administrator has instructed otherwise, the
factory default Port 49153 can be used.
A reason for changing the factory default Local Port may be for
example a firewall that only allows certain port accesses.
1
In any case the Local Port for the Web-IO must be
identical with the corresponding settings in the OPC
server.
Input Trigger:
Activate here the inputs that will trigger a message to the OPC
server when there is a state change.
Application Mode
Select OPC Device
After you have entered all the parameters, click on the
Temporary Storage button.
Select in the navigation tree: Config >> Device >> Output Mode
Subject to errors and modifications:
OPC
133