W&T 57630 Manual page 123

W&T
Box-to-Box
After you have entered all the parameters, click on the
Temporary Storage button.
Select in the navigation tree: Config >> Device >> Output Mode
Here you activate the outputs that will be set by the corresponding
slave inputs for Binary 1 and confirm by clicking on the Temporary
Storage button.
In contrast to the inputs, the outputs activated for Box-to-Box are
no longer accessible by other operation modes.
Now you must activate the new settings. Use the Logout button or
Config >> select >> Session Control >> LogOut.
After clicking on the Save button all the settings are updated in
the Web-IO and the start page is reopened in Default User
mode. The master Web-IO then attempts to open a connection
to the slave Web-IO.
All the functions described here for Binary 1 can of course also
be used under Binary 2. Thus a Web-IO A can be configured in
the Binary 1 area so that the inputs/outputs 0-5 Box-to-Box
work with a Web-IO B. In the Binary 2 area inputs/outputs 6 - 11
can then be configured so that they work Box-to-Box with
another Web-IO.
Subject to errors and modifications: 123