W&T 57630 Manual page 159

W&T
Alarm
Send the settings to the Web-IO by clicking on the Temporary
Storage button.
Under Config >> Device >> Alarm >> Alarm1 >> TCP the TCP-
specific configurations can then be entered.
m
Required access rights: Administrator
IP Addr
Here you enter the IP address of the network station you want
to receive the alarm message.
Port
In this field you enter the local TCP port on which the server
application should receive the TCP alarm messages.
TCP Text
Just as with the mail and SNMP or UDP function, you can enter
here a text which is sent to the TCP server application. To
Subject to errors and modifications: 159