W&T 57630 Manual page 153

W&T
Reply. SInce the Web-IO itself can only send but not receive e-
mail, you should enter here the e-mail address of the person
who has technical responsibility for the Web-IO.
Mail Server
Here you must enter the host name or the IP address of the SMTP
server used to send its alarm mails through the Web-IO.
1
If the name of the mail server is specified, a DNS server
must be specified in the network settings.
Send the settings to the Web-IO by clicking on the Temporary
Storage button.
Specifying the e-mail recipient, subject and text
m
Required access rights: Administrator
Under Config >> Device >> Alarm >> Alarm1 >> Mail you can
now specify who should receive an alarm mail, what should
appear as the subject and what text the e-mail contains.
E-Mail Addr.
Enter the e-mail address for sending the e-mail when the alarm
conditions are met.
Subject
Enter here the text to appear in the subject line of the e-mail.
Subject to errors and modifications:
Alarm
153