System Start-Up; Figure 4-8: Example Of Dip Switch Setting For 3/3 Phase, 50 Hz Ups; Table 4-1: Power Configuration Dip Switch Settings - Gamatronic POWER PLUS Technical Manual

Gamatronic Electronic Industries Ltd.
4.5.3

SYSTEM START-UP

After start-up of the system the POWER+ controller automatically displays the Phase readings
according to the System configuration.
Switch Purpose
SW1
SW2
SW3

Figure 4-8: Example of dip switch setting for 3/3 phase, 50 Hz UPS

Power+ Technical Guide
: Power Configuration DIP Switch Settings
Table 4-1
Master module
preference
Output power
frequency selection
Output power phase
selection
Set left (on)
Preferred master
select(not used)
60 Hz
3-phase
Set right (off)
Automatic via
console
50Hz
Single-phase
53