Setting The Number Of Ups Modules; Figure 5-14: Controller Menu #2; Figure 5-15: Controller Menu #3; Figure 5-16: Controller Menu #4 - Gamatronic POWER PLUS Technical Manual

Gamatronic Electronic Industries Ltd.
5.3

SETTING THE NUMBER OF UPS MODULES

(The default system password is 8 left arrows [8x"
Setting Password Level 1
"
From the Main Screen, press Ent to display the Main Menu
1.
Select "7>SETUP" (Figure 5-1).
2.
Enter the password and press Ent (default password is 8 x "<").
3.
Select "8>Service" (Figure 5-14).
4.
Select "5>Configure" (Figure 5-15).
5.
Select "2> # of UPSs" (Figure 5-16).
6.
Set the number of UPS modules by using the ► and ◄ keys (Figure 5-17).
7.
Press Enter to complete the setup.
8.
The controller applies and saves the new number of modules.
Power+ Technical Guide
" on page 86.

Figure 5-14: Controller menu #2

Figure 5-15: Controller menu #3

Figure 5-16: Controller menu #4

Figure 5-17: Number of UPS modules

<
"]. To change the password, see 11.2,
61