4.
D
AILY OPERATION
4.1
Power + SA25 start-up
This section explains how to start-up the P
You are beginning the process from the UPS OFF NO OUTPUT screen.
1.
Press the ON/OFF button twice.
The BYPASS and ALARM LEDs light up for about 40 seconds.
2.
After a short time the screen reads
"UPS ON, NORMAL MODE".
The ac INPUT and NORMAL LEDs are lit.
3.
You can now turn on the computers or other equipment connected to the UPS.
User Guide: MEGA V2 SA25, Release 1.5
Gamatronic Electronic Industries Ltd.
OWER
Figure 20: UPS OFF, no output
Figure 21: UPS ON, normal mode
P
+ SA start-up is now complete.
OWER
+ SA after a shutdown.
23