Maintenance Procedures And Report - Gamatronic POWER PLUS Technical Manual

Gamatronic Electronic Industries Ltd.
8.3

MAINTENANCE PROCEDURES AND REPORT

Record the values of all parameters checked and of measurements taken during the periodic
maintenance in the form below. Fax the completed form to Gamatronic at +972-2-582-8875.
Power+ model and configuration
Company ______________________
_______________________________
Site ___________________________
Power+ Model __________________
[ ] Up to 50 kVA [ ] Up to 100 kVA
[ ] Annual
Type of maintenance:
System S/N (found at the bottom left side of the base): ______________________________________
Static Switch S/N (found on top of Static Switch after opening):______________________________
Module S/Ns (found on the right side of each module after removing from housing – six last digits only):
1________________ 2________________ 3________________ 4_____________ 5_______________
6________________ 7________________ 8________________ 9_____________ 10______________
Technician Name _______________
_______________________________
V i s u a l I n s p e c t i o n
OK [ ] Not OK [ ]
E n vi r o n m e n t a l I n s p e c t i o n
Environmental temperature
Ventilation
Air conditioning
Comments _________________________________________________________________________________
D i s p l a y P a n e l s
LCD Display
LEDs
V o l t a g e s
Verify that displayed dc voltages, rectifier input voltages, and inverter output voltages are showing proper values. Verify the readings
for the UPS as a whole (menu option 1, System) and for each module (menu option 2, UPS Module).
Dc voltages
Rectifier input voltages
Inverter output voltages
S e r i a l N u m b e r / C l o c k a n d C a l e n d a r
Done
Done
Power+ Technical Guide
Address _______________________________________
_______________________________________________
Phone ________________
No. of modules _______
[ ] 2-phase
[ ] Semi-annual
Date
___________________
Comments ________________________________________________________
________°F
[ ] OK [ ] Not OK
[ ] Yes [ ] No
[ ] OK [ ] Not OK
[ ] OK [ ] Not OK
(+)_______________ (-)_______________ (Total)_______________
Volts: __________ __________
Amperes: __________
Hertz: __________
Volts: __________ __________
Amperes: __________
Hertz: __________
Verify that the Power+ serial number is registered in the System Controller memory. If not, enter the
serial number into the memory and save.
Verify that the Power+ clock and calendar show the right time and date. If either time or date are
incorrect, enter the correct information and save.
E-mail _________________
No. of redundant
[ ] 3-phase modules _______
[ ] Quarterly
Signature
___________________________
Comments ____________________________
Comments ____________________________
__________
__________ __________
__________
__________ __________
73