Gamatronic Electronic Industries Ltd.
14.4
PANEL AND SLAVE DIP SWITCH STATUS
I
NFORMATION
DIP
N-ID
Norm
HiCap
F2
R/W
chgbl
noecH
14.5
SC POWER+ INTERNAL POWER SUPPLY
I
NFORMATION
MBRC
AUX
Good
Bad
14.6
SYSTEM TEMPERATURE
I
NFORMATION
Main Menu > System > press "down arrow" five times
Battery Temperature
Power+ Technical Guide
Table 14-3: Panel and slave dip switch statuses
D
ESCRIPTION
Dual Inline Pin switch
Position of the circuit breakers in the DIP switch
= Circuit breaker is up
= Circuit breaker is down
New ID of rectifier
Battery test execution by command is normal
(internal rectifier command)
High capacity battery set
Number of active flash memory
Flash is upgradable (Read/Write)
It is possible to switch the active Flash memory (Changeable)
No echo when the slave contacts the communication board
Table 14-4: Controller external and internal power statuses
D
ESCRIPTION
Exact value of the voltage of the 5V power supply
Power supplies in the controller
The power supply is ok
A malfunction has occured in the power supply
Table 14-5: System temperature displays
D
ESCRIPTION
Temperature reading from a sensor located near the batteries.
101