Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
1.3.2 display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Parameters
None
Description
Use the display diagnostic-information command to display system diagnostic
information, or save system diagnostic information to a file with the extension .diag in
the Flash memory.
Examples
# Save system diagnostic information to the file default.diag.
<Sysname> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information
N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:
The file is already existing, overwrite it? [Y/N]y
% Output information to file: flash:/default.diag.
Please wait......
# Display the diagnostic information of the system.
<Sysname> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information
N=display)?[Y/N]n
-------------------- display version --------------------
......
<Omitted>
1.3.3 terminal debugging
Syntax
terminal debugging
Chapter 1 Basic System Configuration and
is
saved
to
is
saved
to
1-10
Flash
or
displayed(Y=save
Flash
or
displayed(Y=save
Debugging