Cisco 300 Series Administration Manual page 132
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
The LLDP Neighbor Information page contains the following fields:
Port Details
•
Local Port—Port number.
•
MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
•
Chassis ID Subtype—Type of chassis ID (for example, MAC address).
•
Chassis ID—Identifier of the 802 LAN neighboring device chassis.
•
Port ID Subtype—Type of the port identifier that is shown.
•
Port ID—Identifier of port.
•
Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
•
System Name—Name of system that is published.
•
System Description—Description of the network entity (in alpha-numeric
format). This includes the system name and versions of the hardware,
operating system, and networking software supported by the device. The
value equals the sysDescr object.
•
Supported System Capabilities—Primary functions of the device. The
capabilities are indicated by two octets. Bits 0 through 7 indicate Other,
Repeater, Bridge, WLAN AP, Router, Telephone, DOCSIS cable device, and
station, respectively. Bits 8 through 15 are reserved.
•
Enabled System Capabilities—Primary enabled function(s) of the device.
Management Address Table
•
Address Subtype—Managed address subtype; for example, MAC or IPv4.
•
Address—Managed address.
•
Interface Subtype—Port subtype.
•
Interface Number—Port number.
MAC/PHY Details
•
Auto-Negotiation Supported—Port speed auto-negotiation support status.
The possible values are True and False.
8
109
Advertisement
Table of Contents
