Cisco 300 Series Administration Manual page 465
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
Security: IPV6 First Hop Security
Configuring First Hop Security through Web GUI
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
•
Other Configuration Flag—This field specifies verification of the
advertised Other Configuration flag within an IPv6 RA Guard policy.
-
No Verification—Disables verification of the advertised Other
Configuration flag.
-
On—Enables verification of the advertised Managed Other flag.
-
Off—The value of the flag must be 0.
•
Minimal Route Preference—This field indicates whether the RA Guard
policy will verify the minimum advertised Default Router Preference value in
RA messages within an RA Guard policy.
-
No Verification—Disables verification of the low boundary of
Advertised Default Router Preference.
-
Low—Specifies the minimum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
-
Medium—Specifies the minimum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
-
High—Specifies the minimum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
•
Maximal Route Preference—This field indicates whether the RA Guard
policy will verify the maximum advertised Default Router Preference value
in RA messages within an RA Guard policy.
-
No Verification—Disables verification of the high boundary of
Advertised Default Router Preference.
-
Low—Specifies the maximum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
-
Medium—Specifies the maximum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
-
High—Specifies the maximum allowed Advertised Default Router
Preference value. The following values are acceptable: low, medium and
high (see RFC4191).
20
427
Advertisement
Table of Contents
