Cisco 300 Series Administration Manual page 72
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
Administration
System Settings
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
•
Current Time—Current system time.
•
Base MAC Address—Device MAC address.
•
Jumbo Frames—Jumbo frame support status. This support can be enabled
or disabled by using the Port Settings page of the Port Management menu.
Jumbo frames support takes effect only after it is enabled, and after
NOTE
the device is rebooted.
TCP/UDP Services Status:
•
HTTP Service—Displays whether HTTP is enabled/disabled.
•
HTTPS Service—Displays whether HTTPS is enabled/disabled.
•
SNMP Service—Displays whether SNMP is enabled/disabled.
•
Telnet Service—Displays whether Telnet is enabled/disabled.
•
SSH Service—Displays whether SSH is enabled/disabled.
Other Summary Information:
•
Model Description—Device model description.
•
Serial Number—Serial number.
•
PID VID—Part number and version ID.
•
Firmware Version (Active Image)—Firmware version number of the active
image.
•
Firmware MD5 Checksum (Active Image)—MD5 checksum of the active
image.
•
Firmware Version (Non-active Image)—Firmware version number of the
non-active image.
•
Firmware MD5 Checksum (Non-active Image)—MD5 checksum of the
non-active image.
•
Boot Version—Boot version number.
•
Boot MD5 Checksum—MD5 checksum of the boot version.
•
Locale—Locale of the first language. (This is always English).
•
Language Version—Language package version of the first or English
language.
5
61
Advertisement
Table of Contents
