Cisco 300 Series Administration Manual page 128
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
STEP 3
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Click LLDP Local Information Details to see the details of the LLDP and LLDP MED
TLVs sent to the neighbor.
Click LLDP Neighbor Information Details to see the details of the LLDP and LLDP-
MED TLVs received from the neighbor.
Select the desired port from the Port list.
This page displays the following fields:
Global
•
Chassis ID Subtype—Type of chassis ID. (For example, the MAC address.)
•
Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the device appears.
•
System Name—Name of device.
•
System Description—Description of the device (in alpha-numeric format).
•
Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
•
Enabled System Capabilities—Primary enabled function(s) of the device.
•
Port ID Subtype—Type of the port identifier that is shown.
•
Port ID—Identifier of port.
•
Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
Management Address
Displays the table of addresses of the local LLDP agent. Other remote managers
can use this address to obtain information related to the local device. The address
consists of the following elements:
•
Address Subtype—Type of management IP address that is listed in the
Management Address field; for example, IPv4.
•
Address—Returned address most appropriate for management
use,typically a Layer 3 address.
•
Interface Subtype—Numbering method used for defining the interface
number.
•
Interface Number—Specific interface associated with this management
address.
8
105
Advertisement
Table of Contents
