Link Aggregation - Cisco 300 Series Administration Manual

Port Management

Link Aggregation

STEP 3
STEP 1
STEP 2
STEP 3
Link Aggregation
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
• Port Security—Select to enable the error recovery mechanism for the port
security err-disable state.
• 802.1x Single Host Violation—Select to enable error recovery mechanism
for the 802. 1 x error-disable state.
• ACL Deny—Select to enable. error recovery mechanism for the ACL deny
error-disable state.
• STP BPDU Guard—Select to enable the error recovery mechanism for thee
STP BPDU guard error-disable state.
• UDLD—Select to enable error recovery mechanism for the UDLD shutdown
state.
Click Apply to update the global setting.
To manually reactivate a port:
Click Port Management > Error Recovery Settings.
The list of inactivated interfaces along with their Suspension Reason is displayed.
Select the interface to be reactivated.
Click Reactivate.
This section describes how to configure LAGs. It covers the following topics:
• Link Aggregation Overview
• Static and Dynamic LAG Workflow
• Defining LAG Management
• Configuring LAG Settings
• Configuring LACP
9
129