Cisco 300 Series Administration Manual page 133
Managed switch
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Quick start manual (72 pages) ,
- Datasheet (14 pages)
Table of Contents
Advertisement
8
110
•
Auto-Negotiation Enabled—Port speed auto-negotiation active status. The
possible values are True and False.
•
Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation
capabilities, for example, 1000BASE-T half duplex mode, 100BASE-TX full
duplex mode.
•
Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU
performs physical layer functions, including digital data conversion from the
Ethernet interfaces' collision detection and bit injection into the network; for
example, 100BASE-TX full duplex mode.
802.3 Power via MDI
•
MDI Power Support Port Class—Advertised power support port class.
•
PSE MDI Power Support—Indicates if MDI power is supported on the port.
•
PSE MDI Power State—Indicates if MDI power is enabled on the port.
•
PSE Power Pair Control Ability—Indicates if power pair control is
supported on the port.
•
PSE Power Pair—Power pair control type supported on the port.
•
PSE Power Class—Advertised power class of the port.
802.3 Details
•
802.3 Maximum Frame Size—Advertised maximum frame size that is
supported on the port.
802.3 Link Aggregation
•
Aggregation Capability—Indicates if the port can be aggregated.
•
Aggregation Status—Indicates if the port is currently aggregated.
•
Aggregation Port ID—Advertised aggregated port ID.
802.3 Energy Efficient Ethernet (EEE)
•
Remote Tx—Indicates the time (in micro seconds) that the transmitting link
partner waits before it starts transmitting data after leaving Low Power Idle
(LPI mode).
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Administration: Discovery
Configuring LLDP
Advertisement
Table of Contents
