Cisco 300 Series Administration Manual page 462

20
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Default Settings and Configuration
424
If required, either configure a user-defined policy or add rules to the default
policies for the feature.
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Neighbor Binding Work Flow
In the Neighbor Bindings Settings page, enter the list of VLANs on which this
feature is enabled.
In this same page, set the global configuration values that are used if no values are
set in a policy.
If required, either configure a user-defined policy or add rules the default policies
for the feature.
Add any manual entries required in the Neighbor Binding Table page
Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
If IPv6 First Hop Security is enabled on a VLAN, the switch traps the following
messages by default:
• Router Advertisement (RA) messages
• Router Solicitation (RS) messages
• Neighbor Advertisement (NA) messages
• Neighbor Solicitation (NS) messages
• ICMPv6 Redirect messages
• Certification Path Advertisement (CPA) messages
• Certification Path Solicitation (CPS) message
• DHCPv6 messages
The FHS features are disabled by default.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Security: IPV6 First Hop Security
Default Settings and Configuration