Cisco 300 Series Administration Manual page 472

20
STEP 1
STEP 2
STEP 3
434
FHS Status
To display the global configuration for the FHS features:
Click Security > First Hop Security > FHS Status.
Select a port, LAG or VLAN for which the FHS state is reported.
The following fields are displayed for the selected interface:
• FHS Status
- FHS State on Current VLAN:—Is FHS enabled on the current VLAN.
- Packet Drop Logging:—Is this feature enabled for the current interface
(at the level of global configuration or in a policy attached to the
interface).
• RA Guard Status
- RA Guard State on Current VLAN:—Is RA Guard enabled on the current
VLAN.
- Device Role:—RA device role.
- Managed Configuration Flag:—Is verification of the managed
configuration flag enabled.
- Other Configuration Flag:—Is verification of the other configuration flag
enabled.
- RA Address List:—RA address list to be matched.
- RA Prefix List:—RA prefix list to be matched.
- Minimal Hop Limit:—Is minimum RA hop limit verification enabled.
- Maximal Hop Limit:—Is maximum RA hop limit verification enabled.
- Minimal Router Preference:—Is minimum router preference verification
enabled.
- Maximal Router Preference:—Is maximum router preference
verification enabled.
• ND Inspection Status
- ND Inspection State on Current VLAN:—Is ND Inspection enabled on
the current VLAN.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Security: IPV6 First Hop Security
Configuring First Hop Security through Web GUI