8
STEP 2
122
•
System Name—Neighbors system name.
•
Local Interface—Number of the local port to which the neighbor is
connected.
•
Advertisement Version—CDP protocol version.
•
Time to Live (sec)—Time interval (in seconds) after which the information for
this neighbor is deleted.
•
Capabilities—Capabilities advertised by neighbor.
•
Platform—Information from Platform TLV of neighbor.
•
Neighbor Interface—Outgoing interface of the neighbor.
Select a device, and click Details.
This page contains the following fields about the neighbor:
•
Device ID—Identifier of the neighboring device ID.
•
System Name—Name of the neighboring device ID.
•
Local Interface—Interface number of port through which frame arrived.
•
Advertisement Version—Version of CDP.
•
Time to Live—Time interval (in seconds) after which the information for this
neighbor is deleted.
•
Capabilities—Primary functions of the device. The capabilities are indicated
by two octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP,
Router, Telephone, DOCSIS cable device, and station respectively. Bits 8
through 15 are reserved.
•
Platform—Identifier of the neighbors platform.
•
Neighbor Interface—Interface number of the neighbor through which frame
arrived.
•
Native VLAN—Neighbors native VLAN.
•
Duplex—Whether neighbors interface is half or full duplex.
•
Addresses—Neighbors addresses.
•
Power Drawn—Amount of power consumed by neighbor on the interface.
•
Version—Neighbors software version.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Administration: Discovery
Configuring CDP