Administration: Discovery
Configuring CDP
Configuring CDP
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Status
-
—If the LLDP MED extended power via MDI packets were sent, or
if they were overloaded.
•
802.3 TLVs
Size (Bytes)
-
-
Status
—If the LLDP MED 802.3 TLVs packets were sent, or if they were
overloaded.
•
LLDP Optional TLVs
Size (Bytes)
-
Status
-
—If the LLDP MED optional TLVs packets were sent, or if they were
overloaded.
•
LLDP MED Inventory
Size (Bytes)
-
Status
-
—If the LLDP MED inventory packets were sent, or if they were
overloaded.
•
Total (Bytes)—Total number of bytes of LLDP information in each packet
•
Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
This section describes how to configure CDP.
It covers the following topics:
•
Setting CDP Properties
•
Editing CDP Interface Settings
•
Displaying CDP Local Information
•
Displaying CDP Neighbors Information
•
Viewing CDP Statistics
—Total LLDP MED 802.3 TLVs packets byte size.
—Total LLDP MED optional TLVs packets byte size.
—Total LLDP MED inventory TLVs packets byte size.
8
115