Cisco 300 Series Administration Manual page 492

21
STEP 1
STEP 2
454
• User Defined (Plaintext)—Enter a new passphrase.
• Confirm Passphrase—Confirm the new passphrase.
SSD Rules
Only users with SSD read permission of Plaintext-only or Both are allowed to set
SSD rules.
To configure SSD rules:
Click Security > Secure Sensitive Data Management > SSD Rules.
The currently-defined rules are displayed.
To add a new rule, click Add. Enter the following fields:
• User—This defines the user(s) to which the rule applies: Select one of the
following options:
- Specific User—Select and enter the specific user name to which this rule
applies (this user does not necessarily have to be defined).
- Default User (cisco)—Indicates that this rule applies to the default user.
- Level 15—Indicates that this rule applies to all users with privilege level
15.
- All—Indicates that this rule applies to all users.
• Channel—This defines the security level of the input channel to which the
rule applies: Select one of the following options:
- Secure—Indicates that this rule applies only to secure channels
(console, SCP, SSH and HTTPS), not including the SNMP and XML
channels.
- Insecure—Indicates that this rule applies only to insecure channels
(Telnet, TFTP and HTTP), not including the SNMP and XML channels.
- Secure XML SNMP—Indicates that this rule applies only to XML over
HTTPS and SNMPv3 with privacy.
- Insecure XML SNMP—Indicates that this rule applies only to XML over
HTTP or and SNMPv1/v2and SNMPv3 without privacy.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
Security: Secure Sensitive Data Management
Configuring SSD