Type-Related Parameters For Input Device - Siemens SIMATIC ET 200SP CM 1xDALI Programming Manual

CM 1xDALI command list
3.4 Configuration
3.4.20

Type-related parameters for input device

The following tables describe the type-related parameters for input devices:
Input device type 1 (push button)
Byte 7
Byte 8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Input device type 2 (absolute input)
Byte 7
Byte 8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Input device type 3 (occupancy)
Byte 7
Byte 8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Input device type 4 (light sensor)
Byte 7
Byte 8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
44
Short press time
Double click time
Repeat time
Stuck check time
Resolution
Minimum short press time
Minimum double click time
Deadtime: if the deadtime timer is set, the instance does not send out an event
until the deadtime timer has expired.
Report time: if the report timer is set, it triggers an event every T
"inputValue" is not changed.
Reserved
Reserved
Resolution
Reserved
Reserved
Hold time
Report time
Deadtime
Reserved
Resolution
Reserved
Reserved
Hysteresis band
Hysteresis minimum
Report time
Deadtime
Resolution
Reserved
Reserved
ET 200SP CM 1xDALI Communication Model Description
Programming Manual, 12/2019, A5E47581955-AA
even if the
report