Installing Antenna Accessories; Installing Omni Antenna Accessories - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station

3.2 Installing Antenna Accessories

3.2.1 Installing Omni Antenna Accessories

Accessories used to assemble the omni antenna are antenna fixing clip and jumper.
The omni antenna fixing clip is shown in Figure 3-2 and Figure 3-3.
Figure 3-2 Omni antenna fixing clip (1)
(1) Omni antenna joint
Figure 3-3 Omni antenna fixing clip (2)
& Note:
There are various types of fixing clips for the omni antenna, including the two shown in Figure 3-2 and
Figure 3-3 for reference. In practical installation, the fixing clips should be applied according to the actual
situations. The following takes the antenna fixing clip as shown in Figure 3-2 as an example.
3 Installing RF Antenna and Feeder System
(2) M12%580 U-bolts
3-3
Hardware Installation
(3) Nut M12