Unpacking Inspection On Cartons - Huawei iSiteC BTS3601C Installation Manual

I n s t a l l a t i o n M a n u a l
i S i t e C B T S 3 6 0 1 C C D M A B a s e S t a t i o n
4) Remove the plastic bag.
Inspect the cabinet for t he following problems:
Whether there is any defect on the cabinet appearance;
l
Whether the whole cabinet is deformed;
l
Whether the environment inside the cabinet is clean;
l
Whether other goods such as the storage battery and feeder clip are all there and
l
intact.
Caution:
1) If the inner packing is damaged, it should be recorded in the report in detail.
2) After unpacking, if there is no internal damage, personnel from Huawei should play the major role in
inspection of the equipment especially the parts whose electrical performance is easily affected. If there is
any damage, Huawei should be responsible for handling or compensation.
3) If any article is found inconsistent with the Packing List, please contact Huawei in time.
4) The checked goods should be organized by type.

1.6.3 Unpacking Inspection on Cartons

Generally, the carton is used to pack various modules and terminal equipments, etc.
The module is placed in an antistatic bag for transportation. Inside the bag, there is a
desiccant to keep it dry. The pac king of a module is shown in Figure 1-2. Antistatic
measures should be taken during the unpacking so as to avoid any damage to the
equipment. Meanwhile, ensure a proper ambient temperature and humidity.
Caution:
When moving the equipment from an environment with a relatively low temperature and humidity and to
that with a relatively high temperature and humidity, unpack it until at least 30 minutes later. Otherwise, the
moisture may condense on the equipment surface and thus cause damage.
1 -9
H a r d w a r e I n s t a l l a t i o n
1 I n s t a l l a t i o n P r e p a r a t i o n s