Huawei iSiteC BTS3601C Installation Manual page 106

Installation Manual
iSiteC BTS3601C CDMA Base Station
1) Dustproof cover
Figure 2-26 Appearance of waterproof fiber (figure 1)
2) Unwrap the limit pivoted arm, as shown in Figure 2-27.
1) Limit pivoted arm
Figure 2-27 Appearance of waterproof fiber (figure 2)
3) Unfix the waterproof cover from the MTRM fiber interface; align the dual-LC fiber
connector with the fiber interface. Make the limit pivoted arm correspond to the
locating slot of the fiber interface. Then insert the connector into the fiber interface
gently until a sound is heard indicating that the connector is in position, as shown
in Figure 2-28.
2) Dual-LC fiber connector
2-28
Hardware Installation
2 Installing Cabinet Hardware