Networking Of Inverter - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station
Cable No.
26
27, 30, 33, 36
28, 31, 32, 34,
35
29

2.5.4 Networking of Inverter

This networking mode is applied to sites where -48V power supply is available. Figure
2-63 shows the specific networking.
- 48V
Figure 2-63 Inverter networking
It is required that the metal shell of the inverter be grounded, and the PGND cable of
the step-up transformer be connected to BTS3601C grounding busbar directly. The
PGND cable of the inverter should be made of yellow-green plasitc insulation copper
wire with the core diameter not less than 16mm
For detailed connections of inverter cables, please refer to the relevant contents in
product manuals.
Code
DKBA04041983WX Internal grounding cable of IAFB
DKBA04040300WX PGND power cable
DKBA04041990WX UPS power cable
DKBA04041991WX UPS power cable
DC lightning
protection box
Grounding cable
A pair of fiber cables or E1 cable
2-65
2 Installing Cabinet Hardware
Name
Inverter
BTS3601C 220VAC Input cable
2
.
Hardware Installation
Quantity
1
4
5
1
BTS3601C