Power Labels - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station
The single board or module should not be placed near strong DC magnetic field,
l
for instance, near the cathode ray tube of the oscilloscope. The safety distance
should be at least 10 cm.
Damage caused by static electricity is accumulative. If the damage is slight, the
l
component will not malfunction. However, as the number of damages increase,
the components may suddenly fail. The electrostatic discharging damage to the
component is of two types: obvious damage and hidden damage. Hidden
damage is not shown when the damage occurs, whereas the component may
become vulnerable and easily get damaged under the condition of over-voltage
and of high-temperature.
The correct way of wearing anti-static wrist strap is shown in Figure 1.
Figure 1 Wearing the anti-static wrist strap

3.7 Power Labels

Before connecting the cables, check the correctness of labels and then make the connection.
Plug of anti-static wrist strap
Caution:
S-8
Safety Precautions