Huawei iSiteC BTS3601C Installation Manual page 103

Installation Manual
iSiteC BTS3601C CDMA Base Station
1) Cables connecting Type D
connectors between modules
4) Inter-module cables between
Type N male connectors
7) MBPM E1 cable
9) Fiber connector for MBPM
optical transmission
Figure 2-24 BTS3601C cable connection
Following are the details of the cable distribution of modules:
1) Inter-module RF jumpers
RF jumper (Type D connector) between MTRM and MFEM;
l
RF jumper (Type D connector) between MPAM and MTRM;
l
RF jumper (Type N connector) between MPAM and MFEM;
l
E1 cable (when E1 cable is used for transmission) connecting to MBPM.
l
2) Fiber
Fiber cascading connector (waterproof fiber connector) connected with MTRM
l
fiber interface;
Fiber connector (waterproof fiber connector) between MBPM and MTRM;
l
Fiber connector (when fiber isd used for transmission) connecting to MBPM.
l
3) External cables
RF jumpers (DIN connector) connecting to the antenna feeder interface of the
l
MFEM;
RF jumper (Type N connector) connecting to the GPS interface of the MBPM;
l
2) MTRM fiber cascading connector
5) DC input power cable of battery
8) GPS cable (Type N connector)
10) Fiber connector from MBPM to MTRM
2-25
Hardware Installation
2 Installing Cabinet Hardware
3) Antenna feeder DIN
connector connecting to feeder
6) AC power input cable