Huawei iSiteC BTS3601C Installation Manual page 80

Installation Manual
iSiteC BTS3601C CDMA Base Station
2.1.2 Introduction of Hardware Major Equipment
I. Rack
Rack is composed of backplane box, module guide rail, and back shell to bear various
modules.
Backplane box has been fixed on the back shell before delivery. Modules are
connected to the backplane box via connectors, on which waterproof measures have
been taken.
Module guide rail is also fixed on the back shell, along which modules like MAPM,
MBPM, MTRM, MFEM, and MPAM are installed from left to right in their corresponding
slots.
Back shell can be installed via installation accessories on walls, standing supports,
concrete poles, metal masts, towers, etc. That is, there are multiple choices when
determining the BTS site.
II. Modules
Modules are the core of BTS, including MAPM, MBPM, MTRM, MFEM and MPAM.
Each module is sealed for waterproof, and bottom leading-out mode is adopted for their
corresponding cables.
MPAM has been installed with heat-pipe radiator before delivery, so be carefule not to
damage the heat pipe during installation.
III. Plastic shell
Plastic shell is buckled on the rack and then fixed and locked after the cable distribution.
So the installation of major equipment of BTS is completed.
2.1.3 Introduction of Hardware Auxiliary Equipment
Auxiliary equipment of BTS includes IAFB, AC lightning protection box, UPS, and IABB.
All auxiliary equipment can work outdoors and is optional according to actual
installation environment and project requirements.
I. IAFB
IAFB can provide certain assistance for BTS, i.e. it can hold the major auxiliary
equipment of BTS so as to realize the integrated outdoor installation of auxiliary
equipment of the BTS.
2-2
Hardware Installation
2 Installing Cabinet Hardware