Huawei iSiteC BTS3601C Installation Manual page 124

Installation Manual
iSiteC BTS3601C CDMA Base Station
1) M6%12 assembling bolt
Figure 2-47 Fixing the sun-shading cover
Installing the box on steel platform:
& Note:
Procedure to install the box on steel platform is similar to that on concrete floor.
1) Install the fixing support onto the battery box via 4 M12%20 assembling bolts, as
shown in Figure 2-42.
2) Place the box on the platform and mark positions on the platform for all 4
connection holes in the fixing support.
Drill holes using a percussion drill with the bit of v16. After the drilling, remove the
3)
dust inside and outside the holes with a vacuum cleaner, and then check the
distance among holes. Whenever big errors occur, the relevant holes must be
relocated and drilled again.
2-46
Hardware Installation
2 Installing Cabinet Hardware