Preparing The Spray Gun - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
6.4

PREPARING THE SPRAY GUN

6.4.1
SELECTION OF THE SUITABLE NOZZLE SYSTEM
The process of changing from the fl at spray nozzle to the defl ector cone is described in
chapter 8.8 "Changing from Flat Spray Nozzle to Round Spray Nozzle".
You will fi nd the article numbers of the diff erent nozzles in chapter 12 "Accessories".
Nozzle
Flat spray nozzle
P_01664
Defl ector cone
P_01665
Nozzle Application
P_01664
ORDER NUMBER DOC 2326020
Application overview
Complex shapes
Flat parts (slight window
frame eff ect)
Profi les
Undercuts
Wire goods
Grid designs
Small components
Universal
deep and complex shapes
extensive work pieces
Powder cloud
Widely spread fl at powder cloud
Round powder cloud:
Size of the powder cloud is
dependent on the defl ector
plate diameter
Distance to Powder
work piece discharge
(mm) (g/min)
120 ... 300 50 ... 300
PEM-X1
21