Table of Contents
Advertisement
Preparing the spray gun
2.
Preparing the spray gun
2.1
Select the suitable nozzle system
Nozzle
Deflector cone
Fan spray nozzle
Wide fan spray
nozzle
The part numbers are listed in chapter
2.2
Connecting the spray gun
Before you start making connections, switch off the powder feeding. Refer to the
operating instructions of the corresponding control unit for this.
03/2008
Overview Application
•
Wire goods
•
Grid designs
Difficult workpieces:
•
Undercuts
•
Profiles
Difficult workpieces:
•
Undercuts
•
Profiles
to the electrical connection
at the control unit
0351709
Spray pattern
Oval powder cloud:
Size is dependent on the deflector
cone diameter.
For powder quantities from:
50 ... 300 g/min
Widely spread flat powder cloud.
For powder quantities:
from 50 ... 150 g/min
Widely spread flat powder cloud.
For powder quantities:
from 100 ... 250 g/min
8 "Scope of delivery and spare parts
Tribo air
from the control unit
Powder feed
from the powder injector
- PEM-T3
0201_Duesenauswahl_tribo.doc
lists".
pemt3_0003
7
Advertisement
Table of Contents
