Preparing The Spray Gun; Selection Of The Suitable Nozzle System; Connecting The Spray Gun - WAGNER PEA-C4-HiCoat Assembly And Operating Manual
Automatic powder spray gun for enamel-use
Hide thumbs
Also See for PEA-C4-HiCoat:
- Operating manual (44 pages) ,
- Translation of the original operating manual (60 pages) ,
- Translation of the original operating manual (72 pages)
Table of Contents
Advertisement
Preparing the spray gun
3.
Preparing the spray gun
3.1
Selection of the suitable nozzle system
Nozzle
Fan spray nozzle
3.2
Connecting the spray gun
Before connecting the gun to the system, switch off the high voltage generator.
For information on this activity refer to the related operating instructions for the control units
and control modules.
Hint
Use the parts listed in chapter "Accessories" for connecting and fastening the spray
gun.
10
Overview Application
Difficult workpieces:
•
Undercuts
•
Profiles
•
Flat workpieces
(reduced picture frame)
0390860
– PEA-C4-HiCoat-Enamel
Spray Pattern
Widely spread flat powder cloud
Electrical connection
E
from control unit or
A
high voltage generator
Atomizing air
P
Powder feed
from powder injector
Ground spray gun
via the gun mounting
Peac4_0003
05/2007
Advertisement
Table of Contents
