Pto Drive Control; Rear Pto Speed Control Lever, 540 And 1000 (Or 540E) Rpm; Rear Pto Drive Control Lever - Zetor PROXIMA POWER Z90 2012 Operator's Manual

PTO DRIVE CONTROL

PTO drive is activated with switches on
the right pillar of the cab.
P - Front PTO
Z - Rear PTO
ACQUAINTANCE WITH THE TRACTOR
E152
REAR PTO SPEED CONTROL LEVER,
540 AND 1000 (OR 540E) RPM
The adjustment is performed with the
tractor at standstill by pulling or pushing
the lever up and down.
a - 1000 rpm (or 540E rpm)
b - 540 rpm
The tractor may be optionally equipped
with a PTO shaft end with eight or
twenty-one splines.
Shifting of 540 and 1000 (or 540E)
rpm is possible regardless of the
number of splines of the installed
end. The speed of the PTO and
end piece type must be selected
with regard to the prescribed
speed of the attached machine.
57
G153

REAR PTO DRIVE CONTROL LEVER

The adjustment is performed with the
tractor at standstill by pulling or pushing
the lever up and down.
a -
Independent speed of the PTO
drive
- The rpm value of the PTO de-
pends on the engine speed.
n - Neutral position
b - Dependent speed of the PTO
drive
- The rpm value of the PTO de-
pends on the engaged gear.
G154